Head office, Rana Pratap Bagh, Delhi011 2721 1512+91 97116 99511

  • Science
  • Ready-made model
  • Class 1 to 9
  • Report shown in the photo

Electronic Voting Machine EVM Social Science Working Project Model

This social science working model shows how a vote is cast on an electronic voting machine. Read more about this model

₹389MRP ₹1,000Save 61%

Code B0HLY2CTSG

  • Paid for and delivered by Amazon. The current price and the delivery date for your PIN code are shown there.
  • Sold by Gurukul Technicals Institute, Delhi.
  • Need a different topic, a custom version or a school order? Ask on WhatsApp.
ShareWhatsApp (opens WhatsApp)

Electronic Voting Machine EVM Social Science Working Project Model

Ready-made model

About this model

This social science working model shows how a vote is cast on an electronic voting machine. As shown in the photo, a chart titled Electronic Voting Machine has six rows, five printed party symbols and a NOTA row, each with an arrow, an LED and a blue push button; pressing a button lights the LED in its row. A blue LED glows near the title, beside a picture of an inked finger, and a small black buzzer sits on the other side. A printed report cover is also shown.

How it works

The science behind it

The idea the model demonstrates, in words you can use in your report and when you explain it.

In India, elections to the Lok Sabha and the state Legislative Assemblies are conducted by the Election Commission of India, using electronic voting machines. An EVM has two units joined by a cable: the Control Unit, kept with the polling officer, and the Balloting Unit, placed in the voting compartment. Before voting, polling staff check the voter's name in the electoral roll and mark the left forefinger with indelible ink. The officer then presses the Ballot button on the Control Unit to allow one vote. The voter presses the blue button beside the chosen candidate's name and symbol; a lamp glows beside it, a beep confirms the vote, and the machine locks until the next vote is allowed. The last button is NOTA, None of the Above, added in 2013 for voters who wish to reject every candidate. A VVPAT printer shows the voter a slip with the candidate's serial number, name and symbol. EVMs run on batteries and are not connected to any network.

Make it yourself

Make a push-button electronic voting machine model yourself

Build your own version from scratch, or use the steps to understand how the ready-made model is put together before you present it.

What you need 9

Step by step 9 steps

  1. Draw a ballot panel on the chart: a title at the top, then six rows, each with a symbol, an arrow, an LED hole and a button hole. Make the last row NOTA.

  2. Use made-up symbols such as your school house colours or the letters A to E rather than real party symbols, unless your teacher asks for something else.

  3. Fix a button in each row and push its LED through the board beside it.

  4. At the back, connect one side of every button to the battery positive through the on/off switch.

  5. Connect the other side of each button to its own LED's long leg through a 1 kΩ resistor, and join all the LEDs' short legs to the battery negative.

  6. From that same side of each button, connect a 1N4007 diode, band towards the buzzer, to the buzzer's positive lead. Join the buzzer's negative lead to the battery negative, so every press beeps.

  7. Connect the blue power-on LED with its resistor across the switched supply, so it glows whenever the machine is on.

  8. Test each button

    Only its own LED should light and the buzzer should beep every time.

  9. Hold a mock vote in class and keep a paper tally of the votes for your project file.

Read this first

Safety first

Go through these points before you build or switch anything on. Younger students should do this with an adult.

  • Never short the battery terminals together, and unclip the battery when the model is not on show.
  • Keep a resistor in series with every LED.
  • Solder only with an adult, keep the hot iron on its stand and work in a ventilated room.
  • Power the model only from its 9 V battery; never connect it to a wall socket.

Troubleshooting

If something does not work

The usual problems with this model and how to fix them. Open a problem to see the fix.

Pressing one button lights several LEDs

A diode is missing or the wrong way round, so current flows back through the buzzer wire into the other rows. Check that every diode's band faces the buzzer.

The buzzer does not sound

Check that it is an active buzzer, that its positive lead goes to the diodes, and that the diodes face the right way.

One LED does not light when its button is pressed

The LED may be reversed or the button may be fitted the wrong way. Turn the LED so the long leg goes to its resistor, and check which pins of the button connect when it is pressed.

The power-on LED stays off

Check the battery, the snap connector and the on/off switch.

Exhibition day

How to present it

A running order for the exhibition table or the practical, step by step.

  1. Act out a polling booth: one student as the polling officer allowing each vote and another as the voter pressing a button.

  2. Point to the inked finger picture and explain why the left forefinger is marked with indelible ink.

  3. Use the last row to explain NOTA, and why a voter might choose it instead of a candidate.

  4. Keep the talk neutral: explain how voting works and do not praise or criticise any party whose symbol appears.

Practice

Viva questions

Practice questions on this model, with short answers. Try each one aloud before you open the answer.

What are the two units of an EVM?

The Control Unit, kept with the polling officer, and the Balloting Unit, on which the voter presses the button.

What does NOTA mean?

None of the Above. It lets a voter record that they do not want to vote for any of the candidates.

What is VVPAT?

Voter Verifiable Paper Audit Trail, a printer that shows the voter a paper slip with the chosen candidate's serial number, name and symbol.

Which body conducts elections to Parliament and the state assemblies?

The Election Commission of India, an independent body set up under the Constitution.

Project file

Project file outline

The headings of the project file, in order. Give each heading its own section and write it in your own words.

The listing photo shows a printed project report: if it comes with your order, use this outline to check that your own file covers every part.

Free ebook: Writing a Science Project File
Project fileElectronic Voting Machine EVM Social Science Working Project Model

Contents

  1. Aim: to show how a vote is cast on an electronic voting machine
  2. Introduction: elections and democracy in India
  3. The Election Commission of India and its role
  4. Parts of an EVM: the Control Unit, the Balloting Unit and the VVPAT
  5. Steps of voting at a polling booth, from checking the electoral roll to inking the finger
  6. NOTA and why it was introduced
  7. Construction of the model and its circuit
  8. Observations from a class mock election
  9. Advantages of EVMs over paper ballots, and conclusion

Buying checklist

Before you buy

What to check before you order the model, and what to do when it arrives.

1Before you order

  • Check whether your teacher wants the EVM explained as a social science topic on elections or as a physics circuit, as the explanation differs.
  • Find out how the model is powered, and keep a spare battery of that type for the exhibition day.
  • Keep the box and carry the board flat so the buttons and wires are not pressed or pulled.
  • Check the delivery date for your PIN code on the marketplace, and order well before the exhibition or practical.

2When it arrives

  • Check what arrives against the photo: the chart, the buttons and the lights. The photo also shows a printed report cover, so confirm it comes with your order if you need it.
  • Press every button as soon as it arrives and check that the right light comes on.

Next steps

Take it further

Ways to turn this model into a bigger investigation or a stronger exhibition entry.

  1. Add a counter for each candidate using a microcontroller and a small display, and declare the result after the mock poll.

  2. Add a ballot button for the polling officer, so only one vote can be cast each time it is pressed.

  3. Make a VVPAT-style window where a paper slip with the chosen symbol shows for a few seconds after each vote.

Audience

Who it suits

Suits Class 6 to 9 social science and civics exhibitions on elections and democracy, and school mock elections for student council posts.

  • ClassClass 1 to 9
  • SubjectScience
  • TypeReady-made model
  • Project reportShown in the listing photo

Free to read

Free ebooks for this topic

Free PDF ebooks from Gurukul Technicals Institute on the science, the making and the presenting of projects like this one.

Guide on this websiteHow to choose a working model for a science exhibition
WhatsApp us