61% off- Physics
- Ready-made model
- Class 1 to 9
- Report shown in the photo
Electrical Conductivity Working Model
Code B0G2TBL5QF
- Paid for and delivered by Amazon or Flipkart. The current price and the delivery date for your PIN code are shown there.
- Sold by Gurukul Technicals Institute, Delhi.
- Need a different topic, a custom version or a school order? Ask on WhatsApp.
In this project guide
Ready-made model
About this model
This physics investigatory model tests which liquids let electric current pass through them. As shown in the photo, a yellow chart titled Electrical Conductivity on a pink board carries a drawn circuit of a DC supply, an LED and a beaker, with a 9 V battery clip, an LED and two metal strips on long wires that dip into a cup. The report cover in the photo says it is best used in salt water.
What the listing says
- Conductors and Insulators Science Project
How it works
The science behind it
The idea the model demonstrates, in words you can use in your report and when you explain it.
Materials that let electric current pass through them easily are conductors, such as copper, aluminium and iron; those that do not, such as rubber, plastic and dry wood, are insulators. Liquids can be tested in the same way. When common salt dissolves in water, it splits into charged particles called ions, sodium ions and chloride ions, which move towards the metal strips and carry the current, so the LED glows. Distilled water has almost no ions and is a very poor conductor, while tap water conducts a little because it contains dissolved salts. Salty sweat conducts too, so wet hands on switches can pass current into the body. Most liquids that conduct are solutions of acids, bases or salts, such as lemon juice or vinegar; sugar solution does not conduct, because sugar does not form ions. An LED is used because it glows even with a weak current. Current through a conducting liquid also causes chemical changes: bubbles of gas form on the strips, which is electrolysis, and the same effect is used in electroplating.
Make it yourself
Make an electrical conductivity tester yourself
Build your own version from scratch, or use the steps to understand how the ready-made model is put together before you present it.
What you need 9
Step by step 9 steps
Draw the circuit on the chart: a battery, an LED and a beaker with two electrodes dipping into a liquid.
Push the LED through the board on its drawn symbol. Connect the battery clip's red lead through the 470 Ω resistor to the LED's long leg.
Connect the LED's short leg to one long wire and the battery clip's black lead to the other, and fix a copper strip to the free end of each wire with solder or tape, keeping each joint above the liquid.
Snap the 9 V battery onto the clip and touch the two strips together: the LED should glow brightly, which proves the circuit works.
Fill the cups with distilled water, tap water, salt water, sugar water and lemon juice, and label them.
Dip both strips into each liquid, about 1 to 2 cm apart and never touching, and note how brightly the LED glows.
Rinse the strips in distilled water and dry them between tests, so one liquid does not carry over into the next.
Add salt to a cup of distilled water a pinch at a time, stir, and watch the LED grow brighter.
Record the results in a table and unclip the battery when you finish.
Read this first
Safety first
Go through these points before you build or switch anything on. Younger students should do this with an adult.
- Use only the 9 V battery; never test liquids, or anything else, with electricity from a wall socket.
- Never short the battery, and unclip it whenever the tester is not in use.
- Do not taste or drink any test liquid, and wash your hands after the experiment.
- Bubbles of gas form on the strips in salt water, so work in a ventilated room, keep each test short and do not lean over the cup.
- Keep liquids away from the battery and the clip, and wipe up spills at once.
- If you solder the strips to the wires, do it only with an adult beside you, and rest the hot iron on its stand.
Troubleshooting
If something does not work
The usual problems with this model and how to fix them. Open a problem to see the fix.
The LED does not glow even when the strips touch
The LED may be the wrong way round (its long leg must go towards the battery positive), a joint may be loose, or the battery may be flat.
The LED does not glow in tap water
Tap water conducts only weakly, so the current may be too small to see. This is a correct result; add a pinch of salt or bring the strips a little closer to compare.
The LED glows in every liquid, even distilled water
The strips or bare wire ends may be touching each other, or the cup may have salt left in it. Separate the strips and use a clean cup.
One strip turns dark or greenish
This is a chemical effect of the current on the strip joined to the positive side. Rub it clean with fine sandpaper, rinse it, and keep each test short.
Exhibition day
How to present it
A running order for the exhibition table or the practical, step by step.
Line up labelled cups of distilled water, tap water, salt water, sugar water and lemon juice, and test each one in front of the examiner.
Add salt to distilled water a pinch at a time and let visitors watch the LED grow brighter.
Rinse and dry the metal strips between liquids, and explain that leftover salt would spoil the next result.
Touch both strips to a steel spoon and then to a plastic ruler to show solid conductors and insulators too.
Practice
Viva questions
Practice questions on this model, with short answers. Try each one aloud before you open the answer.
Why does salt water conduct electricity but distilled water does not?
Dissolved salt forms ions that can carry current, while distilled water has almost no ions.
Why is an LED used instead of a bulb in this tester?
An LED glows even with a very weak current, which may be too small to make a bulb's filament glow.
What do the bubbles on the metal strips show?
They show that the current is causing a chemical change in the liquid, called electrolysis, which releases gases at the strips.
Name two conductors and two insulators.
Copper and aluminium are conductors; rubber and plastic are insulators.
Project file
Project file outline
The headings of the project file, in order. Give each heading its own section and write it in your own words.
The listing photo shows a printed project report: if it comes with your order, use this outline to check that your own file covers every part.
Free ebook: Writing a Science Project FileContents
- Aim: to test which liquids conduct electricity using an LED tester
- Introduction: conductors and insulators
- Why some liquids conduct: ions in solutions of acids, bases and salts
- Materials and circuit diagram of the tester
- Procedure and precautions
- Observations: table of liquids and how brightly the LED glows
- Chemical effects of current: bubbles at the electrodes and electroplating
- Why wet hands and electrical switches are a dangerous mix
- Conclusion and bibliography
Buying checklist
Before you buy
What to check before you order the model, and what to do when it arrives.
1Before you order
- Check that conductors and insulators, or the chemical effects of current, is the topic your teacher wants.
- The listing gives the battery type as 9 V; read it to see whether a battery is included, and keep a fresh one for the exhibition.
- Prepare labelled cups of test liquids the day before, and carry salt and clean water to the venue.
- Keep the box so the wires and metal strips are not pulled or bent.
- Check the delivery date for your PIN code on the marketplace, and order well before the exhibition or practical.
- The listing photo shows a printed report. Confirm that it comes with your order, on the marketplace or on WhatsApp, if you need it.
- Practise explaining it. Judges ask what the model shows and why; knowing the science matters as much as the model. The viva questions above are a good place to start.
2When it arrives
- Test it with salt water soon after it arrives, as the report cover in the photo suggests.
Next steps
Take it further
Ways to turn this model into a bigger investigation or a stronger exhibition entry.
Touch both strips to a steel spoon, a key, a pencil lead, an eraser and a plastic ruler, and sort them into conductors and insulators.
Connect a multimeter, set to its milliampere range, in series with one strip, record the current as you add salt spoon by spoon, then plot a graph.
With your teacher in the school lab, pass current through copper sulphate solution between two copper plates to show the idea behind electroplating.
Audience
Who it suits
Suits Class 6 to 8 science on electric circuits, conductors and the chemical effects of current, and simple physics investigatory projects in higher classes.
- ClassClass 1 to 9
- SubjectPhysics
- TypeReady-made model
- Project reportShown in the listing photo
Free to read
Free ebooks for this topic
Free PDF ebooks from Gurukul Technicals Institute on the science, the making and the presenting of projects like this one.
- Free PDF ebook
Electricity and Magnetism Experiments
Hands-on experiments with cells, wires, bulbs and magnets
- Free PDF ebook
Physics Working Models Explained
Twenty classic models, how each works and how to make it
- Free PDF ebook
Your Science Exhibition Guide
Choose a project, build it, present it and answer the judges with confidence
- Free PDF ebook
Writing a Science Project File
How to write the report, from the cover page to the bibliography








