Head office, Rana Pratap Bagh, Delhi+91 97116 99511

  • Biology
  • Ready-made model
  • Printed report included

Photosynthesis System Readymade Science Working Project & Model in Biology with Multicolor Running Lights(with Printed Report)

This ready-made biology working model explains photosynthesis using a printed picture of a sunflower plant, with labels for sunlight, carbon dioxide, water, oxygen and sugars and arrows. Read more about this model

₹429MRP ₹600Save 29%

Code B099QZD6MR

  • Paid for and delivered by Amazon. The current price and the delivery date for your PIN code are shown there.
  • Sold by Gurukul Technicals Institute, Delhi.
  • Need a different topic, a custom version or a school order? Ask on WhatsApp.
ShareWhatsApp (opens WhatsApp)

Photosynthesis System Readymade Science Working Project & Model in Biology with Multicolor Running Lights(with Printed Report)

Ready-made model

About this model

This ready-made biology working model explains photosynthesis using a printed picture of a sunflower plant, with labels for sunlight, carbon dioxide, water, oxygen and sugars and arrows showing what goes in and what comes out. The listing says it has multicolour running lights and comes with a printed report. In the photo, green lights glow along the stem, at the roots and beside the sunlight, carbon dioxide and oxygen labels, and the picture sits in a yellow frame with a shiny purple border.

How it works

The science behind it

The idea the model demonstrates, in words you can use in your report and when you explain it.

Photosynthesis is the process by which green plants make their own food. Chlorophyll, the green pigment in the chloroplasts of leaf cells, absorbs light energy, mainly red and blue light, and reflects green, which is why leaves look green. The plant takes in carbon dioxide from the air through tiny pores called stomata, and water from the soil through its roots, which travels up through the xylem. Using light energy, it turns these into glucose and gives out oxygen. The overall equation is 6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂, in the presence of sunlight and chlorophyll. The oxygen released comes from the splitting of water molecules. The sugar made is used for energy, carried to other parts through the phloem, mainly as sucrose, and stored as starch, which is why a sunlit leaf, once its green colour is removed, turns blue-black with iodine solution. Photosynthesis supplies the oxygen we breathe and starts almost every food chain, from a tulsi plant in the courtyard to rice fields across India.

Make it yourself

Make a photosynthesis model with running lights yourself

Build your own version from scratch, or use the steps to understand how the ready-made model is put together before you present it.

What you need 10

Step by step 9 steps

  1. Stick the plant picture in the middle of the board, with the sun at the top, the soil and roots at the bottom, and space on both sides for labels.

  2. Place the inputs, sunlight, carbon dioxide and water, on one side and the outputs, oxygen and sugars, on the other, and draw arrows into and out of the leaves.

  3. Mark about ten points along the arrows in the order the process happens: sunlight to the leaf, carbon dioxide to the leaf, water from the roots up the stem, then oxygen leaving the leaf and sugars moving to the rest of the plant.

  4. Push an LED through the board at each point and number the LEDs in order.

  5. Build the running-light circuit on a breadboard first: wire the 555 to flash steadily and feed its output to the clock input of the CD4017, then connect each of the CD4017's ten outputs to one LED through a 1 kΩ resistor.

  6. Use the CD4017 datasheet pin diagram to connect outputs Q0 to Q9 to the LEDs in order, and join all the LEDs' short legs to the battery negative.

  7. Connect the CD4017's reset and enable pins to the battery negative, then switch on and check that the lights run in the order of the process.

  8. When it works, solder the circuit on a board with an adult and fix it behind the model with the switch at the edge.

  9. Write the word equation and the balanced chemical equation along the bottom of the model.

Read this first

Safety first

Go through these points before you build or switch anything on. Younger students should do this with an adult.

  • Solder only with an adult, keep the hot iron on its stand and work in a room with fresh air.
  • Fit each IC the right way round, matching its notch to the socket's notch, or it can heat up and fail.
  • Keep a resistor with every LED and switch off when the model is not on show.
  • Let paint and glue dry fully before wiring, and keep water away from the circuit.
  • If you do a starch test on a leaf, heat the alcohol only in a water bath with your teacher, because alcohol catches fire easily.

Troubleshooting

If something does not work

The usual problems with this model and how to fix them. Open a problem to see the fix.

The lights do not move along

The 555 is not flashing. Check its timing resistors and capacitor, and that its trigger and threshold pins are joined together.

The lights run in the wrong order

The CD4017's outputs are not in number order around the chip. Check the pin diagram and rewire Q0, Q1, Q2 and so on to the LEDs in order.

None of the LEDs light

Check that the reset and enable pins go to the battery negative, that each IC is the right way round, and that the battery is fresh.

Some LEDs are much dimmer than others

LEDs of different colours look differently bright at the same current. This is normal; choose high-brightness LEDs, or put the dimmer colours where the room light is lower.

Exhibition day

How to present it

A running order for the exhibition table or the practical, step by step.

  1. Follow the arrows on the picture and name each input (sunlight, carbon dioxide, water) and each output (oxygen, sugars).

  2. Write the balanced equation on a card and explain that the oxygen given out comes from water.

  3. Explain the roles of stomata, xylem and phloem, pointing to the leaves, stem and roots on the model.

  4. Show the result of a starch test on a leaf, or photos of one, done earlier with your teacher.

Practice

Viva questions

Practice questions on this model, with short answers. Try each one aloud before you open the answer.

What are the raw materials of photosynthesis?

Carbon dioxide and water, with sunlight as the energy source and chlorophyll to absorb it.

Where does the oxygen released in photosynthesis come from?

From water, which is split using light energy during the light reactions.

Through which openings does carbon dioxide enter a leaf?

Through stomata, tiny pores mostly on the underside of the leaf, which are opened and closed by guard cells.

How can we test a leaf for starch?

Boil the leaf in water, then warm it in alcohol over a water bath to remove the chlorophyll, rinse it and add iodine solution; a blue-black colour shows starch.

Project file

Project file outline

The headings of the project file, in order. Give each heading its own section and write it in your own words.

The listing includes a printed project report: use this outline to check that your own file covers every part.

Free ebook: Writing a Science Project File
Project filePhotosynthesis System Readymade Science Working Project & Model in Biology with Multicolor Running Lights(with Printed Report)

Contents

  1. Aim: to show how green plants make food by photosynthesis
  2. Introduction: autotrophic nutrition in plants
  3. Raw materials and conditions: carbon dioxide, water, sunlight and chlorophyll
  4. The chemical equation and where the oxygen comes from
  5. Roles of stomata, xylem and phloem
  6. Construction of the model and the running-light circuit
  7. Experiments: the starch test, and showing that light and chlorophyll are needed
  8. Importance of photosynthesis for oxygen and food chains
  9. Conclusion and bibliography

Buying checklist

Before you buy

What to check before you order the model, and what to do when it arrives.

1Before you order

  • The listing says a printed report comes with the model; read it and add your own observations and diagrams.
  • Check in the listing how the lights are powered and whether a battery is mentioned, and keep a fresh one ready.
  • Practise explaining the process while the lights run, from sunlight and raw materials to oxygen and sugars.
  • Keep the box and carry the model flat so the wires at the back are not pulled.
  • Check the delivery date for your PIN code on the marketplace, and order well before the exhibition or practical.

2When it arrives

  • Switch on the lights as soon as the model arrives and again a few days before the exhibition.

Next steps

Take it further

Ways to turn this model into a bigger investigation or a stronger exhibition entry.

  1. With your teacher, keep a potted plant in the dark for two or three days, then test one of its leaves and a leaf from a sunlit plant for starch, and compare.

  2. Use a variegated leaf, such as a croton leaf, to show that only the green parts make starch.

  3. Put a water plant such as hydrilla in water under a lamp and count the oxygen bubbles at different distances from the light.

Audience

Who it suits

Suits Class 7 to 10 biology exhibitions on nutrition in plants, and quick revision of photosynthesis for Class 11 students.

  • SubjectBiology
  • TypeReady-made model
  • Project reportPrinted report included

Free to read

Free ebooks for this topic

Free PDF ebooks from Gurukul Technicals Institute on the science, the making and the presenting of projects like this one.

Guide on this websiteHow to choose a working model for a science exhibition
WhatsApp us