61% off- Physics
- Ready-made model
- Report shown in the photo
Mini Electroscope Science Class 12 Physics Investigatory Project Model Kit
Code B0HLY3FDGH
- Paid for and delivered by Amazon. The current price and the delivery date for your PIN code are shown there.
- Sold by Gurukul Technicals Institute, Delhi.
- Need a different topic, a custom version or a school order? Ask on WhatsApp.
In this project guide
Ready-made model
About this model
This physics investigatory model explains how a simple electroscope detects electric charge. As shown in the photo, a chart titled Mini Electroscope has two drawings of a glass bottle with a cardboard cover, an opened-up metal paper clip and two aluminium foil leaves. In drawing (a) the leaves hang together; in drawing (b) a positively charged glass rod is brought to the clip and the leaves diverge. LEDs glow at the rod tip and on the leaves in (b), a small push button sits below (a), and a printed report cover is also shown.
How it works
The science behind it
The idea the model demonstrates, in words you can use in your report and when you explain it.
Electric charges are of two kinds, positive and negative: like charges repel and unlike charges attract. Rubbing a glass rod with silk moves electrons from the glass to the silk, so the glass becomes positively charged, while a plastic comb rubbed on dry hair becomes negatively charged. Here a metal paper clip passes through an insulating cover, with two light foil leaves hanging from its lower end inside a jar. When a charged rod touches the top of the clip, some charge spreads through the metal to both leaves, which then carry the same kind of charge, so they repel and move apart. A rod held near without touching also opens the leaves: it draws opposite charge to the top of the clip, leaving the foil with the same kind of charge as the rod; this is electrostatic induction. Touching the clip with a finger lets the charge flow through the body to earth, and the leaves fall. On humid monsoon days charge leaks into the moist air, so it works best in dry weather.
Make it yourself
Make a mini electroscope chart and a working jar electroscope yourself
Build your own version from scratch, or use the steps to understand how the ready-made model is put together before you present it.
What you need 10
Step by step 9 steps
Paste the chart, write the title and draw two jars side by side: (a) a simple electroscope with its leaves together, and (b) detection of charge with its leaves apart.
In drawing (b), add a glass rod near the top of the clip, with plus signs on the rod and on the leaves.
Push the LEDs through the board at the tip of the rod and on the two leaves of drawing (b).
At the back, connect each LED's long leg through its own 1 kΩ resistor to a common wire, join the short legs to the battery's negative terminal, and connect the positive terminal through the push button to the common wire.
- Now make the real electroscope
Pierce a small hole in the middle of the cardboard and push the opened-out paper clip through it, with a hook above and a hook below.
Cut two light foil strips of equal size, about 4 cm long and 1 cm wide, and hang them side by side from the lower hook so that they touch.
Place the cardboard on the jar so the strips hang freely inside without touching the sides, and tape the cover in place.
Rub the comb or balloon briskly on dry hair or the cloth, touch it to the top of the clip, and watch the foil strips move apart.
Touch the clip with your finger and watch the strips fall back together as the charge flows away to the earth.
Read this first
Safety first
Go through these points before you build or switch anything on. Younger students should do this with an adult.
- Handle a glass jar with care, and use a plastic jar if younger children will be handling the stall.
- Pierce the cardboard and use scissors only with an adult, and cover the cut end of the paper clip with tape.
- Never short the 9 V battery terminals, and unclip the battery when the model is not on show.
- Keep a 1 kΩ resistor in series with every LED, or the LED can burn out.
- Charge things only by rubbing combs, balloons and rulers; never try the experiment with mains wiring or any device that makes a high voltage.
Troubleshooting
If something does not work
The usual problems with this model and how to fix them. Open a problem to see the fix.
The foil strips do not move at all
The air, the jar or the cardboard may be damp. Try on a dry day, dry the jar and cover first, and rub the comb harder and for longer.
The strips stick to the side of the jar
The strips are too long or the clip is off-centre. Shorten the strips and centre the clip so they hang freely.
The strips open but close again quickly
Charge is leaking away through damp air or the cover. Work in a dry room and keep fingers away from the clip.
The LEDs on the chart do not light
Check the battery and the push button, and that each LED's long leg goes to its resistor.
Exhibition day
How to present it
A running order for the exhibition table or the practical, step by step.
Keep a real jar electroscope beside the chart, and bring a comb rubbed on dry hair near it to show the leaves open.
Touch the clip with your finger to discharge it, and explain earthing as the leaves fall back together.
Use the two drawings to compare an uncharged electroscope with a charged one, pointing to the charges on the rod and leaves.
Explain why the cover must be an insulator and why the leaves must be very thin and light.
Practice
Viva questions
Practice questions on this model, with short answers. Try each one aloud before you open the answer.
What is an electroscope?
A simple device used to detect whether a body is charged, using two light metal leaves that move apart when charged.
Why do the leaves of an electroscope diverge?
Both leaves receive the same kind of charge, and like charges repel each other.
What happens when you touch a charged electroscope with your hand?
The charge flows through your body to the earth, the electroscope is discharged and the leaves collapse.
What charge does a glass rod get when rubbed with silk?
It becomes positively charged, because it loses electrons to the silk.
Project file
Project file outline
The headings of the project file, in order. Give each heading its own section and write it in your own words.
The listing photo shows a printed project report: if it comes with your order, use this outline to check that your own file covers every part.
Free ebook: Writing a Science Project FileContents
- Aim: to make an electroscope and use it to detect electric charge
- Introduction: electric charge and its two kinds
- Charging by rubbing, by conduction and by induction
- Construction of the jar electroscope
- Working: why the foil leaves diverge
- Observations with a charged comb, balloon and ruler
- Earthing and discharging the electroscope
- Sources of error: humidity and leakage of charge
- Conclusion and bibliography
Buying checklist
Before you buy
What to check before you order the model, and what to do when it arrives.
1Before you order
- Check whether your teacher wants a working electroscope as well as the chart; the jar version in this guide is easy to add.
- A printed report cover appears in the photo; confirm that a full report comes with your order, and plan to write your own project file if it does not.
- Practise the comb and foil experiment at home on a dry day before you show it at school.
- Keep the box and carry the board flat so the wires at the back are not pulled.
- Check the delivery date for your PIN code on the marketplace, and order well before the exhibition or practical.
2When it arrives
- Check what arrives against the photo: the chart with its two drawings, the LEDs and the push button.
- Find out how the lights are powered when it arrives, and keep a spare battery of that type for the exhibition day.
Next steps
Take it further
Ways to turn this model into a bigger investigation or a stronger exhibition entry.
Rub a comb, a balloon, a plastic ruler and a steel spoon in turn, and record which ones make the leaves open.
Charge the electroscope by induction: bring a charged comb near, touch the clip with a finger, take the finger away and then the comb, and see the leaves stay apart.
Try the experiment on a dry day and on a humid day, and compare how long the leaves stay apart.
Audience
Who it suits
Suits Class 8 science activities on static electricity, Class 12 physics lessons on electric charges, and school exhibitions where visitors can try charging a comb.
- SubjectPhysics
- TypeReady-made model
- Project reportShown in the listing photo
Free to read
Free ebooks for this topic
Free PDF ebooks from Gurukul Technicals Institute on the science, the making and the presenting of projects like this one.
- Free PDF ebook
Physics Working Models Explained
Twenty classic models, how each works and how to make it
- Free PDF ebook
Investigatory Projects for Class 11 and 12
Topics, method and report structure for physics, chemistry and biology
- Free PDF ebook
Your Science Exhibition Guide
Choose a project, build it, present it and answer the judges with confidence
- Free PDF ebook
Writing a Science Project File
How to write the report, from the cover page to the bibliography








