Head office, Rana Pratap Bagh, Delhi+91 97116 99511

  • Physics
  • Ready-made model
  • Class 10 to 12
  • Report shown in the photo

Zener Diode Voltage Regulator Science Class 12 Physics Investigatory Project Model

This Class 12 physics investigatory model shows how a Zener diode holds a voltage steady. Read more about this model

₹389MRP ₹1,000Save 61%

Code B0HLY939F4

  • Paid for and delivered by Amazon. The current price and the delivery date for your PIN code are shown there.
  • Sold by Gurukul Technicals Institute, Delhi.
  • Need a different topic, a custom version or a school order? Ask on WhatsApp.
ShareWhatsApp (opens WhatsApp)

Zener Diode Voltage Regulator Science Class 12 Physics Investigatory Project Model

Ready-made model

About this model

This Class 12 physics investigatory model shows how a Zener diode holds a voltage steady. As shown in the photo, a white chart titled Zener Diode (Voltage Regulation), framed in blue star-print tape on a pink board, has a circuit with resistors R1 and R2, a key, an LED that glows green and a large Zener diode symbol, with a 9 V type battery fixed on the board. A printed report cover titled Zeener Diode Voltage Regulator is also shown; the usual spelling is Zener.

How it works

The science behind it

The idea the model demonstrates, in words you can use in your report and when you explain it.

A Zener diode is a silicon PN junction diode that is heavily doped and made to work in reverse bias. Heavy doping makes the depletion layer very thin, so even a small reverse voltage sets up a very strong electric field across it. At a particular reverse voltage, called the Zener voltage, this field pulls electrons out of their bonds, and the reverse current rises sharply while the voltage across the diode stays almost constant. This is Zener breakdown, and the diode is designed to work safely in it as long as a resistor limits the current. In a voltage regulator, the Zener is connected in reverse bias across the load, with a series resistor between it and the supply. If the supply voltage rises, the Zener draws more current, the extra voltage drops across the series resistor, and the output stays close to the Zener voltage. In forward bias, a Zener behaves like an ordinary silicon diode.

Make it yourself

Make a Zener diode voltage regulator board yourself

Build your own version from scratch, or use the steps to understand how the ready-made model is put together before you present it.

What you need 10

Step by step 8 steps

  1. Draw the circuit on the chart: the battery and key, the series resistor, the Zener diode in reverse bias, and the LED with its resistor connected across the Zener as the load.

  2. Find the Zener's cathode

    It is the end with the band on its body.

  3. Connect battery positive through the key to one end of the 470 Ω series resistor.

  4. Connect the other end of the series resistor to the Zener's cathode, and the Zener's anode to battery negative, so the Zener is reverse biased.

  5. Connect the 1 kΩ resistor and the LED in series across the Zener: from the cathode through the resistor to the LED's long leg, and from its short leg to battery negative.

  6. Close the key

    The LED should glow. Measure the voltage across the Zener; it should be close to its rated Zener voltage.

  7. Measure the battery voltage too, then repeat both readings with the partly used battery, and show that the output changes much less than the supply.

  8. Fix the parts along the drawn lines with the joints at the back, label each part, and write the readings in a table.

Read this first

Safety first

Go through these points before you build or switch anything on. Younger students should do this with an adult.

  • Never connect the Zener straight across the battery without the series resistor; the current would be too large and the diode would overheat.
  • Never short the battery terminals, and open the key and unclip the battery when the board is not in use.
  • Keep the LED's own resistor in place, or the LED can burn out.
  • Solder only with an adult, keep the iron in its stand and let joints cool before touching them.

Troubleshooting

If something does not work

The usual problems with this model and how to fix them. Open a problem to see the fix.

The LED does not glow

Check that the LED's long leg goes towards the resistor side, that the key is closed and that the battery is fresh.

The voltage across the Zener is only about 0.7 V

The Zener is in forward bias. Turn it round so its banded end goes towards the positive side.

The output voltage falls as the battery runs down

The supply has come too close to the Zener voltage, so not enough current flows to keep it in breakdown. Use a fresh battery.

The Zener gets warm

The series resistor is too small or has been bypassed. Check its value and that it is in series between the key and the Zener.

Exhibition day

How to present it

A running order for the exhibition table or the practical, step by step.

  1. Explain from the symbol which end of the Zener is the cathode, and why it is connected in reverse bias.

  2. Measure the voltage across the Zener and across the battery with a multimeter, and explain why, in a regulator, the Zener voltage changes much less than the battery voltage as the battery runs down.

  3. Draw the reverse V-I characteristic on a card and mark the Zener voltage where the current rises sharply.

  4. Explain why a Zener regulator needs a resistor in series between the supply and the Zener, and what would happen to the Zener current without it.

Practice

Viva questions

Practice questions on this model, with short answers. Try each one aloud before you open the answer.

Why is a Zener diode used in reverse bias?

In reverse breakdown the voltage across it stays nearly constant over a wide range of current, which is what a regulator needs.

What is the role of the series resistor?

It limits the current through the Zener and takes up the difference between the supply voltage and the Zener voltage.

How is a Zener diode different from an ordinary diode?

It is heavily doped and designed to break down sharply at a set reverse voltage and to work safely there.

What is the difference between Zener and avalanche breakdown?

Zener breakdown happens in heavily doped junctions when a strong field pulls electrons from bonds; avalanche breakdown happens in lightly doped junctions when fast carriers knock out more carriers by collision.

Project file

Project file outline

The headings of the project file, in order. Give each heading its own section and write it in your own words.

The listing photo shows a printed project report: if it comes with your order, use this outline to check that your own file covers every part.

Free ebook: Writing a Science Project File
Project fileZener Diode Voltage Regulator Science Class 12 Physics Investigatory Project Model

Contents

  1. Aim: to study the Zener diode as a voltage regulator
  2. Introduction: semiconductors and the PN junction
  3. The Zener diode: heavy doping, symbol and reverse characteristic
  4. Zener breakdown and avalanche breakdown
  5. Working of the Zener voltage regulator, with the circuit diagram
  6. Materials and procedure
  7. Observations: table of supply voltage and output voltage
  8. Applications in power supplies and as a steady reference voltage
  9. Precautions and conclusion

Buying checklist

Before you buy

What to check before you order the model, and what to do when it arrives.

1Before you order

  • Check with your teacher that a Zener regulator suits your investigatory project guidelines.
  • The photo also shows a printed report cover beside the board; if you need a report, confirm with the seller before ordering that it comes with the model.
  • A 9 V type battery is fixed on the board in the photo; keep a fresh spare for the practical exam.
  • Carry the board flat in a box so the battery and wires are not pulled loose.
  • Check the delivery date for your PIN code on the marketplace, and order well before the exhibition or practical.
  • Practise explaining it. Judges ask what the model shows and why; knowing the science matters as much as the model. The viva questions above are a good place to start.

2When it arrives

  • Check what arrives against the photo: the circuit chart, R1, R2, the key, the LED and the Zener.
  • Close the key as soon as the model arrives and check that the LED glows.

Next steps

Take it further

Ways to turn this model into a bigger investigation or a stronger exhibition entry.

  1. With your teacher, use a variable DC supply in the lab to raise the input step by step, and plot output voltage against input voltage.

  2. Plot the reverse V-I characteristic of the Zener with a milliammeter and a voltmeter, and mark the breakdown point.

  3. Compare the Zener regulator with a three-pin regulator IC such as the 7805 on a breadboard.

Audience

Who it suits

Suits Class 12 physics investigatory projects on semiconductor devices, and diploma and first-year engineering students learning how simple power supplies are regulated.

  • ClassClass 10 to 12
  • SubjectPhysics
  • TypeReady-made model
  • Project reportShown in the listing photo

Free to read

Free ebooks for this topic

Free PDF ebooks from Gurukul Technicals Institute on the science, the making and the presenting of projects like this one.

Guide on this websiteClass 12 physics investigatory project: how it is marked and how to present it
WhatsApp us