64% off- Maths
- Ready-made model
- Class 1 to 9
- Report shown in the photo
Cube Root Scanner Working Model with Two Probes, Maths Project
Code B0G2TD3D4Y
- Paid for and delivered by Amazon or Flipkart. The current price and the delivery date for your PIN code are shown there.
- Sold by Gurukul Technicals Institute, Delhi.
- Need a different topic, a custom version or a school order? Ask on WhatsApp.
In this project guide
Ready-made model
About this model
This working model is a cube root scanner, a two-probe matching quiz on an assembled board. One column shows eight perfect cubes, from 8 to 729, and the other shows their cube roots, 2 to 9, in a shuffled order, with a coiled spring contact beside each. When one probe touches a number and the other touches its correct cube root, the LED under the title lights. It runs from a 9 V battery through a snap connector, and makes a quick, hands-on activity for a maths exhibition or a revision class.
How it works
The science behind it
The idea the model demonstrates, in words you can use in your report and when you explain it.
The cube of a number is that number multiplied by itself three times, and the cube root undoes this: since 7 × 7 × 7 = 343, ∛343 = 7. This board shows the cubes of 2 to 9: 8, 27, 64, 125, 216, 343, 512 and 729. To find the cube root of a perfect cube, split it into prime factors, make groups of three equal factors and take one factor from each group: 216 = (2 × 2 × 2) × (3 × 3 × 3), so ∛216 = 2 × 3 = 6. The last digit also helps, because each digit from 0 to 9 gives a cube with a different last digit; a cube ending in 2 has a root ending in 8, as 8³ = 512. Behind the board, each number's contact is wired to its correct root, so the probes complete the electric circuit and light the LED only on a matching pair; any other pair leaves the circuit open.
Make it yourself
Make a two-probe cube root scanner yourself
Build your own version from scratch, or use the steps to understand how the ready-made model is put together before you present it.
What you need 8
Step by step 8 steps
Write the heading at the top and draw two columns. In the left column write the eight perfect cubes 8, 27, 64, 125, 216, 343, 512 and 729.
In the right column write the cube roots 2, 3, 4, 5, 6, 7, 8 and 9 in a mixed-up order, so the answers are not simply in line with their cubes.
Push a metal contact through the board beside every number and every root, leaving a small loop or head on the front for a probe to touch.
On the back, join each cube's contact to the contact of its cube root with insulated wire: 8 to 2, 27 to 3, 64 to 4 and so on up to 729 to 9. Keep the eight wires from touching one another.
Push the LED through the board just under the heading so its legs come out at the back.
Make the tester on the back: battery positive to the 470 Ω resistor, then to the LED's long leg; the LED's short leg goes to the first probe wire, and the battery negative goes to the second probe wire.
Bring both probe wires out to the front through small holes and fix a crocodile clip or a bare metal tip on the end of each.
Touch one probe to a number and the other to a root: the LED should light only for the correct pair. Test all eight correct pairs and a few wrong ones, then cover the back wiring with a sheet of card.
Read this first
Safety first
Go through these points before you build or switch anything on. Younger students should do this with an adult.
- Use the cutter or sharp scissors only with an adult nearby, cutting away from your fingers on a cutting mat or old board.
- Always keep the resistor in series with the LED; an LED connected straight to a 9 V battery burns out almost at once.
- Bend or tape the legs of every contact at the back so no sharp points stick out.
- Never let the battery's two terminals touch a coin, key or bare wire, as that short-circuits it, and unclip the battery after use.
Troubleshooting
If something does not work
The usual problems with this model and how to fix them. Open a problem to see the fix.
The LED does not light even for the correct answer
The LED may be the wrong way round (the long leg must face the battery positive), a wire may be loose under a contact, or the battery may be weak. Touch the two probes together: if the LED still stays dark, the fault is in the tester, not the board.
The LED lights for a wrong answer as well
Two back wires or two contact legs are touching each other. Spread the legs apart, wrap each joint in insulating tape and test every pair again.
The LED flickers or lights only when a probe is pressed hard
The contact is loose or dirty, or its back wire is not held tightly. Tighten the contact, rub its front with fine sandpaper and re-make the joint behind it.
Visitors ask why the cube root of 64 is 4 and not 8
Because 4 × 4 × 4 = 64. Eight is the square root of 64, since 8 × 8 = 64, which is a different question, so this is a good moment to compare squares and cubes.
Exhibition day
How to present it
A running order for the exhibition table or the practical, step by step.
Ask a visitor to pick any number on the left, say its cube root aloud, and then check it with the two probes.
Work out one cube root live by prime factorisation, such as 216 or 512, circling each group of three factors in a different colour.
Keep a small drawing of the circuit beside the model and explain that the LED glows only when the probes close a complete path.
Mention the unit-digit pattern of cubes so you can answer quick mental-maths questions with confidence.
Practice
Viva questions
Practice questions on this model, with short answers. Try each one aloud before you open the answer.
What is a perfect cube?
A perfect cube is a number that is the cube of a whole number, such as 8 (2³), 125 (5³) or 343 (7³).
Is 500 a perfect cube?
No. Its prime factors are 2 × 2 × 5 × 5 × 5, and the two 2s do not make a group of three; it lies between 7³ = 343 and 8³ = 512.
If a perfect cube ends in 8, what is the last digit of its cube root?
It must be 2, because 2³ = 8 and no other digit from 0 to 9 gives a cube ending in 8.
Why does the LED light only for the correct pair?
Each number is wired at the back to its own cube root, so the probes complete the circuit through the LED only when they touch a matching pair.
Project file
Project file outline
The headings of the project file, in order. Give each heading its own section and write it in your own words.
The listing photo shows a printed project report: if it comes with your order, use this outline to check that your own file covers every part.
Free ebook: Writing a Science Project FileContents
- Aim: to make a two-probe scanner that checks the cube roots of perfect cubes
- Introduction: cubes, perfect cubes and the cube root symbol
- Table of the cubes of 2 to 9 and their cube roots
- Finding cube roots by prime factorisation, with worked examples
- The unit-digit pattern of cubes
- Materials and construction of the scanner board and the probes
- Circuit diagram and working of the LED checker: closed and open circuits
- Observations: pairs tested and whether the LED glowed
- Conclusion and bibliography
Buying checklist
Before you buy
What to check before you order the model, and what to do when it arrives.
1Before you order
- Check that cubes and cube roots are in your class syllabus and that a working model is what your teacher has asked for.
- Read the listing carefully to see what comes with it, so you know whether you still need a report, a battery or a chart.
- Practise explaining the prime-factor method with two or three numbers of your own, because examiners often ask for a fresh example.
- Keep the box and some packing material to carry the model safely to school.
- Check the delivery date for your PIN code on the marketplace, and order well before the exhibition or practical.
- The listing photo shows a printed report. Confirm that it comes with your order, on the marketplace or on WhatsApp, if you need it.
2When it arrives
- Open it as soon as it arrives, check for loose contacts or wires, and test every number with its cube root well before the exhibition day.
Next steps
Take it further
Ways to turn this model into a bigger investigation or a stronger exhibition entry.
Show how to estimate the cube root of a number that is not a perfect cube, for example that ∛100 lies between 4 and 5.
Add a card on negative numbers and explain why ∛(−27) has a real answer while √(−9) does not.
Add rows for larger cubes such as 1000 and 1331, or make a second board for squares and square roots.
Turn the quiz into a timed game and record visitors' scores as data for your report.
Audience
Who it suits
Suits Class 8 maths exhibitions and classroom demonstrations of cubes and cube roots, and works as a quick revision aid in Class 9.
- ClassClass 1 to 9
- SubjectMaths
- TypeReady-made model
- Project reportShown in the listing photo
Free to read
Free ebooks for this topic
Free PDF ebooks from Gurukul Technicals Institute on the science, the making and the presenting of projects like this one.
- Free PDF ebook
Maths Working Models and Activities
Make maths visible: models for number, geometry, algebra and data
- Free PDF ebook
Your Science Exhibition Guide
Choose a project, build it, present it and answer the judges with confidence
- Free PDF ebook
Writing a Science Project File
How to write the report, from the cover page to the bibliography
- Free PDF ebook
Viva Questions for Science Projects
How to answer examiner questions, with sample questions for popular projects








