Head office, Rana Pratap Bagh, Delhi011 2721 1512+91 97116 99511

  • Maths
  • Ready-made model
  • Report shown in the photo

Binary to Decimal Number Using LEDs Mathematics Working Project Model CBSE

This maths working model shows how the decimal numbers 0 to 9 are written as 4-bit binary numbers. Read more about this model

₹589MRP ₹1,000Save 41%

Code B0HLXZ31SK

  • Paid for and delivered by Amazon. The current price and the delivery date for your PIN code are shown there.
  • Sold by Gurukul Technicals Institute, Delhi.
  • Need a different topic, a custom version or a school order? Ask on WhatsApp.
ShareWhatsApp (opens WhatsApp)

Binary to Decimal Number Using LEDs Mathematics Working Project Model CBSE

Ready-made model

About this model

This maths working model shows how the decimal numbers 0 to 9 are written as 4-bit binary numbers. As shown in the photo, the chart lists 0000 to 1001 beside the numbers 0 to 9 with a push button for each, and four LEDs marked B3, B2, B1 and B0 glow for the 1s in the code; pressing 9 lights B3 and B0. The photo also shows a printed maths project report cover.

How it works

The science behind it

The idea the model demonstrates, in words you can use in your report and when you explain it.

Our everyday numbers use the decimal system, which has base 10, the digits 0 to 9 and place values of 1, 10, 100 and so on. The binary system has base 2 and only two digits, 0 and 1. Each binary digit is called a bit, and moving one place to the left doubles its value, so in a 4-bit number the place values from right to left are 1, 2, 4 and 8. To convert binary to decimal, multiply each bit by its place value and add: 1001 = 8 + 0 + 0 + 1 = 9, and 0110 = 4 + 2 = 6. To convert decimal to binary, divide by 2 again and again and read the remainders from bottom to top. Four bits give 2 × 2 × 2 × 2 = 16 combinations, from 0000 (0) to 1111 (15). Computers use binary because an electronic switch has two clear states, on and off, just as each LED here is either glowing or dark. Eight bits make one byte.

Make it yourself

Make a binary to decimal LED model yourself

Build your own version from scratch, or use the steps to understand how the ready-made model is put together before you present it.

What you need 8

Step by step 8 steps

  1. Draw the table on the chart: the decimal numbers 0 to 9 in one column and their 4-bit codes, 0000 to 1001, in the next, with the place values 8, 4, 2 and 1 written above B3, B2, B1 and B0.

  2. Fix the four LEDs in a row in the order B3, B2, B1, B0 from left to right, and connect each LED's short leg through its own 1 kΩ resistor to the battery negative.

  3. Fix a push button beside each decimal number, and connect one side of every button to the battery positive through the on-off switch.

  4. From the other side of each button, connect a diode to each LED whose bit is 1 in that number's code, with the diode's band (cathode) towards the LED's long leg. For example, button 9 (1001) gets two diodes, to B3 and B0, and button 7 (0111) gets three, to B2, B1 and B0.

  5. Button 0 needs no diodes, because 0000 lights no LED.

  6. Count your diodes

    The codes for 1 to 9 contain fifteen 1s altogether, so fifteen diodes are needed.

  7. Switch on and press every button in turn, checking the glowing LEDs against the table.

  8. Fix the circuit board behind the chart, tidy the wires and finish the edges with tape.

Read this first

Safety first

Go through these points before you build or switch anything on. Younger students should do this with an adult.

  • Never short the 9 V battery, and unclip it when the model is not being shown.
  • Keep a resistor in series with every LED, or the LEDs can be damaged.
  • Solder only with an adult, keep the hot iron in its stand and work in a ventilated room.
  • Trim the component legs with the cutters pointing down, away from your eyes.

Troubleshooting

If something does not work

The usual problems with this model and how to fix them. Open a problem to see the fix.

Pressing one button lights extra LEDs

A diode is missing or reversed, so current is flowing back through another button's wiring. Check that every link has a diode with its band towards the LED.

One LED never lights

The LED may be in backwards (its long leg must receive current from the diodes), its resistor may be loose, or a joint may be dry. Check it with a fresh battery.

The LEDs show the wrong number

The LEDs may be in the wrong order. B3, worth 8, must be on the left and B0, worth 1, on the right.

The LEDs are dim

The battery is probably weak. Fit a fresh 9 V battery and switch off between demonstrations.

Exhibition day

How to present it

A running order for the exhibition table or the practical, step by step.

  1. Ask a visitor to choose a number from 0 to 9, press its button and work out its value from the glowing LEDs using 8, 4, 2 and 1.

  2. Show decimal to binary on paper by dividing a number by 2 repeatedly and reading the remainders upwards.

  3. Explain that a glowing LED stands for 1 and a dark LED for 0, just as a switch in a computer is on or off.

  4. Point out that B3 is the most significant bit, worth 8, and B0 the least significant bit, worth 1.

Practice

Viva questions

Practice questions on this model, with short answers. Try each one aloud before you open the answer.

What is the base of the binary number system?

The base is 2, and the system uses only the two digits 0 and 1.

Convert 1001 from binary to decimal.

1 × 8 + 0 × 4 + 0 × 2 + 1 × 1 = 9.

How many different numbers can 4 bits show?

Sixteen, because 2 × 2 × 2 × 2 = 16, from 0000 (0) to 1111 (15).

Why do computers use the binary system?

Electronic switches have two reliable states, on and off, which can stand for 1 and 0.

Project file

Project file outline

The headings of the project file, in order. Give each heading its own section and write it in your own words.

The listing photo shows a printed project report: if it comes with your order, use this outline to check that your own file covers every part.

Free ebook: Writing a Science Project File
Project fileBinary to Decimal Number Using LEDs Mathematics Working Project Model CBSE

Contents

  1. Aim: to show the 4-bit binary codes of the decimal numbers 0 to 9 using LEDs
  2. Introduction: number systems and place value
  3. The binary system: bits, base 2 and the place values 8, 4, 2 and 1
  4. Converting binary to decimal and decimal to binary, with worked examples
  5. Table of the decimal numbers 0 to 9 and their binary codes
  6. Circuit of the model: push buttons, diodes and LEDs
  7. Observations: which LEDs glow for each button
  8. Uses of binary in computers, mobile phones and digital displays
  9. Conclusion and bibliography

Buying checklist

Before you buy

What to check before you order the model, and what to do when it arrives.

1Before you order

  • Check with your teacher that number systems or binary numbers fit your class and the exhibition theme.
  • Read the listing to see what is mentioned with the model; the photo shows a printed maths project report cover, so check whether a report and a battery are included.
  • Practise converting a few numbers both ways out loud, since visitors often ask you to convert their own number.
  • Keep the box so the push buttons and LEDs are not knocked on the way to school.
  • Check the delivery date for your PIN code on the marketplace, and order well before the exhibition or practical.

2When it arrives

  • Press every button as soon as it arrives and check the LEDs against the table on the chart.

Next steps

Take it further

Ways to turn this model into a bigger investigation or a stronger exhibition entry.

  1. Extend the table to 15 (1111) and explain why four bits cannot go any higher.

  2. Add a real seven-segment display driven by a CD4511 BCD to seven-segment decoder IC, so the decimal digit lights up as well; the decoder needs proper logic levels at its inputs, so plan that wiring with your teacher.

  3. Show binary addition with the LEDs, for example 0101 + 0011 = 1000, that is 5 + 3 = 8.

  4. Write your roll number or your age in binary and explain how eight bits make one byte.

Audience

Who it suits

Suits Class 6 to 10 maths exhibitions on number systems and Class 11 computer science students starting binary numbers.

  • SubjectMaths
  • TypeReady-made model
  • Project reportShown in the listing photo

Free to read

Free ebooks for this topic

Free PDF ebooks from Gurukul Technicals Institute on the science, the making and the presenting of projects like this one.

Guide on this websiteHow to choose a working model for a science exhibition
WhatsApp us